Contents of the SubmitLog.txt:
Backburner Submission Starting...20
Connecting to localhostInfo20
VR_Reception_Position1_option1Disabling Vray Render Region for SubmissionInfo2
VR_Reception_Position1_option1Pass Submission Starting (Command Line Mode)...Info2
FinishedNetsubmission Cancelled part way throughDone1
FWIW, I am not cancelling!
Let me know if I can help with anything to fix this Grant, it is becoming a pain!
Statistics: Posted by olly — Mon Sep 28, 2020 9:34 pm
]]>
Next time it happens I will take a look at SubmitLog.txt and report back...
Statistics: Posted by olly — Mon Sep 28, 2020 5:53 pm
]]>
The output in the submission feedback dialog is also written to a file during submission so you can inspect post-closing that dialog - if you check your ../<3dsmaxroot>/scripts/RPManager directory, look for
SubmitLog.txt
and see if it has any relevant information to why it stopped part way and send my way if there is. I will try to repro here - that the dialog is closing when it shouldn't might help track it down.
cheers,
grant
Statistics: Posted by admin — Sun Sep 27, 2020 11:19 pm
]]>
Cheers,
/Nick
Statistics: Posted by Nick Jensen — Fri Sep 25, 2020 8:32 am
]]>
Statistics: Posted by olly — Thu Sep 24, 2020 11:56 am
]]>
@Grant
I just wanted to clarify that this only seems to happen when using Net Submit Checked.
So far selecting multiple passes and Net submit selected, works as expected each time.
Any ideas?
Cheers,
Olly
Statistics: Posted by olly — Thu Sep 24, 2020 9:01 am
]]>
/Nick
Statistics: Posted by Nick Jensen — Wed Sep 23, 2020 9:13 am
]]>
When this happens the "RPManager Submission Feedback" window closes itself so you cannot see if there were any errors!
Anyone else getting this or have any ideas?
Cheers,
Olly
Statistics: Posted by olly — Sun Sep 20, 2020 9:55 pm
]]>
Thanks a lot for that really quick answer!
Cheers!
Statistics: Posted by raistlin — Mon Sep 07, 2020 2:37 pm
]]>
- I wasn't allowed to insert an image for some reason, but nevermind. It works
Cheers,
/Nick
Statistics: Posted by Nick Jensen — Mon Sep 07, 2020 7:26 am
]]>
Can you try this version:
http://www.rpmanager.com/installers/RPM ... p_7.09.exe
I could repro here and this fix sorts it out for me.
thanks,
grant
Statistics: Posted by admin — Fri Sep 04, 2020 3:13 pm
]]>
I've got the same problem here...
Can you explain how i can fix it please? It's reallin annoying and time consumming to launch everything one by one...
I've got the very last RPM version available here, 3dsmax 2021, Vray 3.7 (yes...)
I hope a solution really quickly, too much problem between MAx/ Windows/Vray/RPM it's too much for my brain this days..
Cheers
Statistics: Posted by raistlin — Fri Sep 04, 2020 8:46 am
]]>
I do suspect that it's an issue with our setup somehow, but any input would be greatly appreciated.
Cheers,
/Nick
Statistics: Posted by Nick Jensen — Fri Sep 04, 2020 5:56 am
]]>
thanks,
grant
Statistics: Posted by admin — Thu Sep 03, 2020 11:05 pm
]]>
We're experiencing a pretty consistent problem, when sumbitting multiple passes (see image).
If we're only submitting one pass, we're fine - but as soon as we're submitting several passes, it will submit the first pass, and then just keep returning a "failed to connect to manager" more or less infinetely.
The problem has occured randomly since last x-mas where all computers in the office got a fresh win10 install, though though only a few scenes or computers produced this error - but after a fresh install of MAX2019, Vray and RPM 7, it is pretty much all computers (all tested for now anyways) so I cannot rule out that it is a network/user rights problem, but I am running out of ideas (not being a full blown sys admin).
All manager/server info is correct upon submission.
- we have previously been able to fix it, by opening the max render setup, submitting to network rendering, and then typing in the manager address, connecting, and then cancelling, then resubmitting from RPM works as it should. This approach no longer works.
- for some reason when this happens, the manager address always shows up as 255.255.255.0 in the max network render setup, and automatic search is enabled - even if specified otherwise in RPM - as if RPM and Max are not agreeing on who's in charge.
We tried a fresh RPM install, wiping all existing user data and starting from scratch, but nothing changed.
Any ideas on this?
Statistics: Posted by Nick Jensen — Thu Sep 03, 2020 6:45 am
]]>